What this Radar Horizon Calculator does
The Radar Horizon Calculator estimates the distance at which Earth’s curvature begins to obstruct a direct line of sight between a radar antenna and a target. It uses the antenna height, target height, and an effective Earth-radius factor to produce an idealized horizon distance in kilometers. In defence and logistics planning, this can help frame questions about where a sensor might have a geometric view of an aircraft, vessel, or other elevated object.
The estimate is based on a familiar approximation: distance in kilometers is 3.57 multiplied by the sum of the square roots of the two heights in meters, adjusted by the selected effective Earth-radius factor. A factor of 1.00 represents geometric Earth curvature without an atmospheric refraction adjustment. A factor around 1.33 is often used as a conventional planning assumption for standard refraction, but actual propagation varies. The calculator therefore gives a model result, not a detection guarantee or a prediction of radar performance.
The horizon describes a geometric boundary. A radar may fail to detect an object well inside that boundary because of terrain, clutter, equipment limits, signal conditions, or target characteristics. Conversely, atmospheric conditions can sometimes extend or alter propagation. The displayed distance should be read as a first-pass line-of-sight estimate.
How to use the Radar Horizon Calculator
Enter the height of the radar antenna above the relevant surface, then enter the target’s height using the same reference convention. Height means elevation above the local surface for this simplified calculation. If terrain elevation is significant, a more detailed terrain profile is needed to describe the geometry accurately.
- Radar antenna height (m) is the antenna’s height above the local surface. Use a positive value in meters.
- Target height (m) is the target’s height above the local surface. A surface-level target can be entered as zero.
- Effective Earth-radius factor adjusts the curvature model to represent a chosen refraction assumption. Use 1.00 for the geometric model, or another justified value such as 1.33 for a conventional standard-refraction estimate.
After entering the values, read Estimated horizon (km) as the combined line-of-sight distance between the radar and target. The inputs accept antenna heights from 1 to 10,000 meters, target heights from 0 to 10,000 meters, and factors from 1 to 2. These bounds keep the calculation usable for a broad range of illustrative cases, while remaining simple enough to interpret.
For example, with a radar antenna at 30 m, a target at 10 m, and a factor of 1.33, the calculation is 3.57 × (√(1.33 × 30) + √(1.33 × 10)). The terms are approximately 6.32 and 3.65, so the result is 3.57 × 9.97, or about 35.59 km. This is an approximate geometric horizon under the selected assumption.
How the Radar Horizon Calculator formula works
The calculator formula is 3.57 * (Math.pow(earth_radius_factor * radar_height, 0.5) + Math.pow(earth_radius_factor * target_height, 0.5)). The Math.pow expressions raise each factor-adjusted height to the power of 0.5, which is the square root. The two square-root distances are added because the radar and target each contribute a portion of the visible horizon.
The constant 3.57 converts the square-root height relationship into kilometers when heights are entered in meters and the effective-radius factor is applied in this form. The factor represents an effective Earth radius relative to the geometric Earth radius. Increasing it increases the modeled distance, since a larger effective radius corresponds to a gentler apparent curvature. This is a model parameter, not a direct measurement of atmospheric conditions at a particular location or time.
For a target at the surface, the target term becomes zero, and only the antenna height contributes. Raising the radar or target increases the estimate according to the square-root relationship. Doubling a height does not double its contribution. Instead, the contribution grows by the square root of two. That relationship makes elevation valuable to horizon distance, while still producing diminishing gains as height increases.
Use cases for the Radar Horizon Calculator
This calculator can support early-stage reasoning in several settings:
- Sensor siting discussions: compare how different antenna elevations change the idealized line-of-sight distance.
- Maritime awareness: estimate how the height of a coastal radar and a vessel’s mast affect curvature-limited visibility.
- Airspace monitoring: explore how an aircraft’s altitude contributes to geometric visibility from a ground sensor.
- Logistics planning: communicate why elevated positions can matter when considering sensor placement along a route or operational area.
- Training and education: demonstrate the relationship among height, curvature, refraction assumptions, and horizon distance.
Use the result to compare scenarios with clearly stated inputs. For example, holding the target height and factor constant while changing antenna height isolates the effect of elevation in this model. These comparisons can help structure a planning conversation, but they do not establish coverage or operational suitability.
Other factors to consider when calculating radar horizon
The calculation assumes a smooth spherical Earth and a direct path between the two heights. Real terrain may rise between the radar and target, blocking the line of sight earlier. Hills, buildings, vegetation, coastlines, and structures can all affect the actual path. A terrain-aware analysis requires location data and elevation profiles, which this simple calculator does not use.
Atmospheric refraction changes how radio waves bend. The effective Earth-radius factor approximates that effect in a single number, while real atmospheric layers can vary across distance and time. Ducting or unusual propagation may extend coverage, and other conditions may reduce it. The chosen factor should therefore be documented when sharing an estimate.
Finally, line of sight is only one condition related to radar detection. Frequency, antenna pattern, transmit power, receiver sensitivity, target size and orientation, clutter, interference, and processing all matter. This tool calculates none of those properties. Treat its output as an idealized geometric horizon, then consult suitable engineering analysis and current local information for any operational use.
Radar horizon calculator FAQ
Does the horizon distance equal radar detection range?
No. It estimates a curvature-limited line-of-sight distance under the entered assumptions. Detection range also depends on the radar system, target, environment, and signal conditions.
Why enter both radar height and target height?
Both endpoints contribute to the visible distance. A higher antenna raises the radar’s horizon, and a higher target raises the target’s horizon. The formula adds these two contributions.
What effective Earth-radius factor should I use?
Use 1.00 for the geometric Earth model. A value such as 1.33 is a conventional approximation for standard refraction. Local atmospheric conditions may differ, so use a factor supported by the analysis context when precision matters.
Can I enter a target height of zero?
Yes. Zero represents a target at the local surface in this simplified model. The radar antenna still needs a positive height, as required by the input range.
Does the calculator account for hills or buildings?
No. It assumes smooth Earth curvature and does not inspect terrain, structures, or geographic location. Those features can obstruct or reshape the actual line of sight and need separate assessment.